Introduction
The 6061 T6 Aluminum Formwork 600 Width Standard Panel is primarily used for concrete pouring of walls, beams, and floor slabs in residential or standard-floor structures, and is designed for reuse.
Customizable content
| Customizable Item | Available Options / Ranges |
|---|---|
| Panel Width | 600mm / 500–700mm customizable |
| Panel Length | 1000mm / 1200mm / 1500mm / 1800mm / 2000mm / Custom per project drawing |
| Panel Thickness | 3.0mm / 3.5mm / 4.0mm / 4.5mm / 5.0mm / Custom thickness |
| Aluminium Grade | 6061-T6 |
| Template Type | Wall panel / Beam panel / Slab panel / Column panel / Inside corner / Outside corner / Custom shapes |
| Panel Temper / State | T6 / T651 / Custom per client requirement |
| Rib Height | 40mm / 50mm / 60mm / Custom height |
| Rib Spacing | 200mm / 250mm / 300mm / Custom per project drawing |
| Hole Size | Diameter: 12mm / 14mm / 16mm; Pitch: 100mm / 150mm / 200mm / Custom per drawing |
| Connection Method | Pin + wedge / Bolt connection / Other custom methods |
| Edge Treatment | Straight edge / Chamfered / Deburred / Custom |
| Surface Finish | Mill finish / Brushed / Coated / Other custom finish |
| Designed Reuse Times | 300 / 400 / 500 |
| Packaging Method | Coil / Pallet-bound / Carton-packed sheets |
FAQ
Q: What types of construction projects are suitable for 6061 T6 aluminum formwork?
A: Suitable for the construction of walls, beams, floor slabs, and columns in residential buildings, standard-height buildings, and small to medium-sized commercial buildings.
Q: Are there any limitations on the number of times the formwork can be reused?
A: Designed for reuse up to 300–500 times, it must be disassembled and stored according to the instructions to avoid damage.
Q: How should the formwork be handled and stacked on the construction site?
A: The formwork should be stacked flat or rolled up and placed upright to avoid bending, scratching, or excessive pressure. Keep it in a dry environment.
Q: What precautions should be taken when installing and disassembling aluminum formwork?
A: Use the recommended pin + wedge or bolt connection method. Avoid pulling forcefully during disassembly. Check the hole positions and edge integrity.
Q: What should be done if the surface of the formwork is damaged or has concrete residue?
A: Clean up concrete residue promptly. Minor scratches can be left unused. Severe damage or broken holes require replacement of the formwork to ensure the safety and accuracy of the formwork.
Hot Tags: 6061 t6 aluminum formwork 600 width standard panel, China 6061 t6 aluminum formwork 600 width standard panel manufacturers, suppliers, factory, , , , Aluminium Formwork Construction
