Introduction
Aluminum Formwork Standard Panel 600 Width is used for concrete pouring of walls, beams, and floors in residential or standard-story structures, and is reusable.
Customizable content
| Customizable Item | Available Options / Ranges |
|---|---|
| Panel Width | 600mm / 500–700mm customizable |
| Panel Length | 1000mm / 1200mm / 1500mm / 1800mm / 2000mm / Custom per project drawing |
| Panel Thickness | 3.0mm / 3.5mm / 4.0mm / 4.5mm / 5.0mm / Custom thickness |
| Aluminium Grade | 6061-T6 |
| Template Type | Wall panel / Beam panel / Slab panel / Column panel / Inside corner / Outside corner / Custom shapes |
| Panel Temper / State | T6 / T651 / Custom per client requirement |
| Rib Height | 40mm / 50mm / 60mm / Custom height |
| Rib Spacing | 200mm / 250mm / 300mm / Custom per project drawing |
| Hole Design | Diameter: 12mm / 14mm / 16mm; Pitch: 100mm / 150mm / 200mm / Custom per drawing |
| Connection Method | Pin + wedge / Bolt connection / Other custom methods |
| Edge Treatment | Straight edge / Chamfered / Deburred / Custom |
| Surface Finish | Mill finish / Brushed / Coated / Other custom finish |
| Designed Reuse Times | 300 / 400 / 500 |
| Packaging Method | Coil / Pallet-bound / Carton-packed sheets |
FAQ
Q: What types of construction are 6061 T6 aluminum formwork suitable for?
A: Suitable for concrete construction of walls, beams, floor slabs, and columns in residential buildings, high-rise standard-story buildings, and small to medium-sized commercial buildings.
Q: How many times can the formwork be reused?
A: Typically, it can be reused 300–500 times, provided that proper dismantling and storage methods are followed.
Q: How to handle and store the formwork on-site?
A: The formwork should be stacked flat or rolled upright, avoiding bending, excessive pressure, and scratches. Keep it in a dry environment.
Q: What precautions should be taken when installing and dismantling the formwork?
A: Use the recommended pins + wedges or bolts for connection. Avoid pulling forcefully when dismantling. Check the hole positions and edge integrity.
Q: What should be done if the surface of the formwork or the holes are damaged?
A: Clean up concrete residue promptly. Minor scratches can continue to be used. Severe damage or broken holes require replacement to ensure construction safety and accuracy.
Hot Tags: aluminum formwork standard panel 600 width, China aluminum formwork standard panel 600 width manufacturers, suppliers, factory, Aluminium Formwork Construction, ,