Introduction
Aluminum Formwork System Design is used for the forming and construction control of concrete structures such as walls, floors, beams, and columns.
Customizable content
| Customization Item | Options / Parameters |
|---|---|
| Material | Aluminum 6061-T6 / Aluminum 6082 |
| Plate Thickness (mm) | 4.0 / 4.5 / 5.0 / 5.5 |
| Bearing Capacity (KN/m²) | 30 / 35 / 40 / 45 / 50 / 55 |
| Reuse Times | 300 / 350 / 400 / 450 / 500 |
| Application Type | Residential / Apartment / Commercial / High-rise / Industrial |
| Plastering Requirement | No Plastering / Plastering Required |
| Wall Panel Dimensions (mm) | Length: 1200 / 1500 / 1800 / 2000 Width: 600 / 900 / 1200 / 1500 Thickness: 50 / 75 / 100 / 120 |
| Floor Slab Dimensions (mm) | Length: 1200 / 1500 / 1800 / 2000 Width: 600 / 900 / 1200 / 1500 Thickness: 50 / 75 / 100 / 120 |
| Beam Dimensions (mm) | Width: 200 / 300 / 400 / 500 Height: 300 / 400 / 500 / 600 Length: 1200 / 1500 / 1800 / 2000 |
| Column Dimensions (mm) | Side: 200 / 300 / 400 / 500 Height: 3000 / 3600 / 4200 / 4800 / 5400 Thickness: 50 / 75 / 100 / 120 |
| Assembly Mode | Full Assembly / Modular Assembly / Partial Combination / Layer-by-layer Assembly |
| Connector Specifications | Pins: 8 / 10 / 12 mm Wedges: 50 / 75 / 100 mm Tie Rods: 16 / 20 / 25 / 32 mm Support Rods: Custom per floor height Bracket Types: Standard / Adjustable / Heavy-duty |
| Additional Templates / Accessories | Corner Panels / Stair Templates / Elevator Shaft Templates / Door & Window Templates / Edge Protection Panels / Curved Panels |
| Surface Treatment | Sandblasted / Anodized / Smooth Finish / Powder Coated |
| Template Layout Design | Standard Grid Layout / Customized Modular Layout / Mixed-size Combination Layout |
| Support System Configuration | Single-layer Support / Double-layer Support / Adjustable Height Support / Customized Bracing Arrangement |
- Panel system
- Support system
- Accessory system
- Fastening system
Aluminum formwork system
| Special-shaped plate | Standard plate | ||
|
Stair side panels |
Wall Panels |
Floor panels |
Corner C groove |
|
Staircase headboard |
Beam support |
Beam bottom C groove |
Beam bottom plate |
|
Stair dogtooth board |
Floor support |
Floor C groove |
Angle Aluminum |
|
Stair support |
Middle keel |
Corner C slot |
Beam side plate |
| Material | Aluminum 6061-T6 | Bearing capacity (KN/m²) | 30-50KN/m² |
| Aluminum Thickness | 4.00mm | Reuse Times: | ＞300 times |
| Application: | House, Appartment | Plastering: | No Need |
| Size | Variety of sizes according to project drawing | ||
Packaging and transportation
Hot Tags: aluminum formwork system design, China aluminum formwork system design manufacturers, suppliers, factory, Engraved 1050 aluminum plate, Aluminum Alloy Sheets for Automobile Panels, Composite iron plate, Form Aluminium Formwork, , Aluminium Column Formwork
